- Thickness0.14 mm
- Temp.90 °C
- BackingGlass Fiber Reinforced Po…
Automotive Overview
Adhesive tapes replace mechanical fasteners throughout vehicle assembly: bonding trim and emblems, sealing against water and dust, damping panel vibration, and insulating wiring. Selection is governed by temperature cycling, resistance to oils and cleaning agents, and long-term adhesion to painted surfaces and low-surface-energy plastics.
Solutions by Automotive Systems
Exterior / Body
Exterior / Body
- Wiper Motors
- Windshield
- Headlights
- Fog Lights
- Rear Lights
- Doors
- Fender Panels
- Side Mirrors
Choosing the right Automotive
Vietape LB7305 – LABEL
LB7305
- Thickness0.05 ± 0.003 mm
- Temp.-40 to 90 °C
- BackingGloss Silver Polyester Fi…
Vietape LB7304 – LABEL
LB7304
- Thickness0.05 ± 0.003 mm
- Temp.-20 to 120 °C
- BackingMatte White Polyester Film
Vietape LB7302 – LABEL
LB7302
- Thickness0.07 ± 0.003 mm
- Temp.-20 to 80 °C
- BackingMatte White Polypropylene…
Vietape LB7301 – LABEL
LB7301
- Thickness0.07 ± 0.003 mm
- Temp.-10 to 60 °C
- BackingCoated Paper
Vietape LB7300 – LABEL
LB7300
- Thickness0.07 ± 0.003 mm
- Temp.-40 to 120 °C
- BackingMatte Pearlized PP
Vietape TS720 Series – DOUBLE SIDED TISSUE TAPE
TS720 Series
- Thickness0.1–0.15 mm
- AdhesiveHigh performance Acrylic
- Thickness2 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness0.05 mm
- Temp.-40 to 200 °C
- AdhesiveAcrylic
- Thickness0.1 mm
- Temp.-40 to 90 °C
- AdhesiveWater-soluble adhesive
- Thickness0.1 mm
- AdhesiveAcrylic
- Thickness3.0 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness2.0 mm
- Temp.90 °C
- AdhesiveAcrylic
- Temp.90 °C
- AdhesiveHot-melt adhesive
- Thickness3.0 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness2.0 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness1.1 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness1.1 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness0.4 mm
- Temp.90 °C
- AdhesiveAcrylic
- Thickness1, 2, 3, 4… mm
- Temp.-40 to 120 °C
- AdhesivePSA Acrylic
- Temp.-40 to 90 °C
- AdhesiveAcrylic
- BackingPrismatic Sheeting
- Thickness0.06 ± 0.007 mm
- AdhesiveNatural Rubber
- BackingStriped Polyester
- Thickness0.21 ± 0.02 mm
- Temp.-40 to 130 °C
- AdhesiveAcrylic
- Thickness0.05 ± 0.005 mm
- AdhesiveAcrylic
- BackingPolyester Film
- Temp.-40 to 90 °C
- AdhesiveAcrylic
- BackingPolyester Film
- Thickness0.23 mm
- Temp.-40 to 90 °C
- AdhesiveAcrylic
- Thickness0.06 mm
- Temp.-40 to 90 °C
- AdhesiveAcrylic
- Thickness0.08 mm
- Temp.-40 to 90 °C
- AdhesiveAcrylic
Vietape 1060PP – BOPP Tape
1060PP
- Thickness0.06 mm
- Temp.60 °C
- AdhesivePressure Sensitive Adhesi…
Vietape PI1901 – Kapton tape
PI1901
- Thickness0.06 mm
- Temp.-70 to 260 °C
- AdhesiveSilicone
- Thickness0.28 mm
- Temp.90 °C
- BackingPE Extruded Cloth
- Thickness1, 1.5, 2, 3… mm
- Temp.-40 to 90 °C
- Temp.-40 to 90 °C
- Adhesive467MP
- BackingPolycarbonate
- Thickness0.13 mm
- Temp.-40 to 100 °C
- AdhesiveAcrylic
- Thickness0.12 mm
- AdhesiveHot-melt adhesive
- BackingKraft Paper
- Thickness0.14 mm
- Temp.-40 to 90 °C
- BackingFiberglass Reinforced Kra…
- Thickness0.17 mm
- Temp.90 °C
- BackingGlass Fiber Reinforced Po…
- Thickness0.12 mm
- Temp.90 °C
- BackingGlass Fiber Reinforced Po…
- Thickness0.125 mm
- BackingGlass Fiber Reinforced BO…
- Thickness0.14 mm
- Temp.90 °C
- BackingFiberglass Reinforced Pol…
- Thickness1, 2, 3, 4… mm
- Temp.-40 to 90 °C
- AdhesiveAcrylic
Vietape EPF7101 – EPDM Foam Tape
EPF7101
- Thickness1, 2, 3, 4… mm
- Temp.-40 to 120 °C
- AdhesiveAcrylic
- Thickness1, 1.5, 2, 3… mm
- Temp.-40 to 100 °C
- AdhesiveAcrylic
- Thickness0.15 mm
- Temp.-40 to 120 °C
- AdhesivePSA Acrylic
- Thickness0.1 mm
- Temp.90 °C
- AdhesivePSA Acrylate
- Thickness0.15 mm
- Temp.-40 to 120 °C
- AdhesivePSA Acrylic
- Thickness0.01 mm
- Temp.-40 to 120 °C
- Temp.-40 to 120 °C
- AdhesivePSA Acrylic
- Thickness0.8 mm
- Temp.-40 to 120 °C
- AdhesivePSA Acrylic
AF620 Series – double sided acrylic foam tape
AF620 Series
- Thickness0.5–1.5 mm
- Temp.90 °C
- AdhesiveHigh performance Acrylic …
- Thickness0.06 mm
- Temp.-70 to 260 °C
- AdhesiveSilicone